ABB robot maintenance service welcome to call guangzhou guangke intelligent technology co., LTD. Maintenance cycle of ABB robot:

Maintenance cycle - every 3000 hours, every 4000 hours or 1 year.

ABB robot applications include: handling, assembling, stacking, grasping, arc welding, spot welding, casting, cutting, stamping, cleaning, spraying, etc.

Robot maintenance, industrial robot maintenance, industrial control equipment maintenance,ABB robot maintenance, robot maintenance

ABB robot maintenance includes a full range of models, such as:

IRB 1600, IRB 2400, IRB 2600, IRB 4400, IRB 4600, IRB 5350, IRB 5400, IRB 5500, IRB 6620, IRB 6640, IRB 6700, IRB 7600

1. ABB manipulator maintenance spare parts

1. Grease

2. Maintenance spare parts include SMB battery, cooling fan, dust filter, contactor contact, motor upper lamp, fuse.

Ii. ABB robot body standard maintenance

Routine inspection

1. Body cleaning: dust and clean the robot body according to the field work.

2. Check whether the ontology and tools are fixed well.

3. Check the limit block of each shaft

4. Check the condition and wear of robot signal cable, power cable, user cable and body cable.

5. Check the sealing state to check whether there is oil leakage or oil leakage in the gear box and wrist of the body.

ABB maintenance function measurement of manipulator

1. Check the temperature

2. Noise check

3. Repeat accuracy check

4. Mechanical zero measurement

5. Check motor brake status

Replacement of maintenance parts

1. Body oil replacement robot gear box, balance cylinder or connecting rod oil replacement.

2. Robot SMB board inspection and battery replacement check whether the fixed connection of SMB board is normal and replace the battery.

In order to accurately and quantitatively fuel ABB robots and replace oil products, the company specially purchased an intelligent fuel pump, which can also be connected with temperature detection and liquid level sensor devices, to ensure the rapid and convenient replacement of oil products and fuel products of ABB robots, greatly saving manpower and material resources.

Iii. Maintenance standards of ABB robot control cabinet

Routine inspection

1. Clean the control cabinet. Clean the exterior of the robot control cabinet and dust the interior of the control cabinet.

2. Check the fastness of all parts in the control cabinet.

3. Clean and tidy the teaching apparatus and cables.

4. Check the status of circuit board indicator light in the control cabinet to confirm the status of circuit board.

5. Check the cables inside the control cabinet. All cables in the control cabinet are connected firmly and neatly.

Control cabinet measurement

1. Power supply voltage measurement

2. Safety loop detection

3. Function test of teaching device

4. Check the calibration compensation value of the system

5. System backup and import detection

6. Hard disk space detection

7. Humidity check

Replacement of maintenance parts

1. Replacement of drive fan unit

2. Replace the dustproof filter

3. Auxiliary contactor contact replacement

4. Fuse replacement

5. Replace the motor power indicator

ABB robot maintenance, ABB robot maintenance, yaskawa robot maintenance, kuka robot maintenance is one of the important projects of guangzhou guangke intelligent technology co., LTD. The company purchased a number of advanced testing equipment, maintenance products 100% machine testing, self-provided a large number of ABB robot vulnerable parts, truly achieve chip level maintenance. Since its establishment, it has cultivated a skilled service team, and has many years of experience in robot technology service. It has always maintained a far leading edge in ABB manipulator maintenance and ABB robot maintenance.

Source: guangke intelligent reprint reference!